Benefits of the LQH lifting support system
The LQH lifting supports can be controlled via a removable touch panel or an app, and operate seamlessly via Bluetooth both indoors and outdoors. The fully automatic 4-post system is low-maintenance and features a space-saving oil tank, integrated emergency controls and robust stainless steel base plates.
Safety
The LQH supports only extend when the engine is switched off. If the engine starts, an alarm sounds and all supports retract automatically. Hand pumps allow the supports to be retracted manually in the event of a power cut.
Comfort
A single tap on the touch panel or the app automatically levels the motorhome. The system can be controlled from inside or outside via Bluetooth – it’s fast, quiet and precise.
retrofit
The LQH struts are available in various lengths as single-stroke units or cylinders. Before installation, check that there is sufficient installation space. Installation is carried out by certified partners.
LQH – Horizontal alignment made easy
The hydraulic LQH levelling jacks make it much easier to level motorhomes with precision. Four powerful jacks, a central hydraulic unit and intelligent controls quickly bring the vehicle into a horizontal position at the touch of a button on the touch panel – either manually or automatically via the tilt sensor. Pairs of supports move in sync, preventing twisting and protecting sensitive components. Precise sensors ensure a low levelling height and fast, quiet and controlled alignment. In this way, LQH enhances comfort, stability and the sense of space in the interior at every parking spot.
Hubstützen mit eingebauter Sicherheit
Zu Ihrer Sicherheit lassen sich die hydraulischen Stützen generell nur dann bedienen, wenn die Zündung ausgeschaltet ist. Wird die Zündung eingeschaltet, ertönt ein Alarmton und die Hubstützen werden sofort und automatisch eingefahren. Für den Fall der Fälle, zum Beispiel beim Ausfall der Bordelektrik, hat das System eine Handpumpe, die das Einfahren der Hubstützen ermöglicht. Die Handpumpe ist serienmäßig an jeder Pumpeneinheit vorhanden.
A) Permanently installed control panel
- Switch on system
- Manual mode (hand symbol).
- vehicle by Spirit level Align exactly in balance (move pairs of supports manually)
- Manual mode leave
- “Retract” + “Automatic leveling” together ≥ 5Sek. press → first beep = start saving
- During storage: Support symbols flash, all other LEDs light up permanently
- Second beep = Saving completed
- System turn off
B) Removable control panel
- Switch on system
- Stop‑Taste hold for a long time → signal tone & display symbols flash (Expert mode)
- vehicle with Spirit level align exactly
- Auto-leveling button press until Acknowledgment tone sounds
System switch it off and on again, supports drive in → Zero point set
The LINNEPE QuickLift hydraulics have an emergency operation. If the hydraulics cannot be switched on, the supports can be retracted manually using an emergency operating lever on the pump unit.
Depending on the vehicle structure, the LINNEPE QuickLift hydraulics can be used Starter battery or the Body battery be supplied with voltage. It is up to you to decide which solution makes sense in each vehicle authorized specialist company as part of the installation.
A) Permanently installed control panel
- Switch on system
- One-time Bluetooth pairing (radius approx. 20 m)
- Follow the instructions in the app
B) Removable control panel
- Switch on system
- Hold the stop button for 5–8 seconds → Expert mode
- ALL IN Press – display flashes
- In the app Couple Hold down and follow the instructions
- After the confirmation signal, the flashing stops → pairing completed
The LINNEPE QuickLift hydraulics are generally low-maintenance. An oil change will every four to five years recommended.
In addition, they should Hydraulic cylinder pistons cleaned three to four times a year and then with a suitable adhesive lubricant, e.g. b. Würth HHS 2000, be sprayed again.
Since the operating conditions can vary greatly, one can more frequent cleaning necessary be – especially when there is a lot of pollution.
Important:
If the vehicle is left under high stress conditions for a longer period of time (e.g. several weeks directly by the sea, through which Salt deposits arise), the pistons should before entering be cleaned.
This is how to clean and lubricate properly:
- Let the piston extend.
- Rinse only with clean water – no cleaners, no soaps, no aggressive agents.
- With a Dry completely with a clean cloth.
- Then the pistons with a high-strength adhesive lubricant (z. B. Würth HHS 2000) Spray or lubricate.
- Let it retract briefly and extend again so that the lubricant is evenly distributed.
No, no ground clearance is lost by installing the LINNEPE QuickLift hydraulics.
The supports willmounted as low as possibleto get onemaximum stroke distanceto ensure – but at the same timeas high as necessary, so that the supportsnot the lowest point of the vehicleand therefore no ground clearance is lost.
Installation is always vehicle-specific and in such a way that safe operation and sufficient ground clearance are guaranteed.
No. The LINNEPE QuickLift hydraulics are required no ABE, no parts report and must not in the vehicle documents registered become.
A) Permanently installed control panel
- Switch on system
- Symbol Tank emptying ≥ 5 Sec. Drücken
- Bring the vehicle into the desired inclined position
- Symbol Tank emptying again ≥ 5 sec. drücken
- Storage is complete when another beep sounds and the LED turns off
- Switch off system
B) Removable control panel
- Switch on system
- Long press the stop button (expert mode)
- Briefly press the gray water tank button
- Drive vehicle into position
- Press the gray water tank button again (save)
Yes, the LINNEPE QuickLift hydraulics can generally be used to change wheels. However, it is absolutely necessary, Jack stands under the vehicle to ensure safety and prevent the vehicle from falling in the event of a possible hydraulic failure.
A weighing function only makes sense if it always weighs accurately, even under a wide variety of circumstances (e.g. large temperature differences).
Even a tolerance of just 3% results in a deviation of +/- 105kg for a vehicle weight of 3500kg.
Due to system-related measurement and tolerance deviations, we consciously decided against an integrated weighing function. As a result, the system concentrates completely on its core tasks – precise leveling and maximum stability.
Yes, the system can be controlled via app. Requirement:LINNEPE App Version V20 and activated location sharing.
Yes, the LINNEPE QuickLift hydraulics have a savable position with a gray water symbol. This function specifically raises the vehicle on the side opposite the gray water tank drain so that the gray water tank can be emptied more quickly and completely.
No, the LINNEPE QuickLift hydraulics may only be used by trained LINNEPE service partners be mounted. Self-assembly is not permitted, as only authorized specialist companies about the necessary Qualifications and experience have to have one safe and professional to ensure installation.
The LINNEPE QuickLift hydraulics have an automatic safety function.
If the engine is started while the supports are still extended, a warning signal sounds, and the supports retract automatically. This prevents you from accidentally driving off with the supports extended and damaging your vehicle or the system.
The pump unit of the LINNEPE QuickLift hydraulics can do both within the vehicle as well as under the vehiclebe mounted. At a Underfloor installation the unit comes with a Underfloor box installed to it before weather influences, stone chips and other external influences.
In principle, it is possible to expand the LINNEPE QuickLift hydraulics and transfer them to another vehicle. This primarily affects the main unit. However, depending on the vehicle, different lifting supports are required. In addition, the hydraulic hoses must always be replaced. In addition, holes remain on the original vehicle, for example for the control panel or power supply. From an economic point of view, a conversion is usually not recommended. In practice, it makes more sense to leave the added value of the lifting support system on the existing vehicle and to equip the new vehicle with a new LINNEPE QuickLift hydraulic system.
Die LINNEPE QuickLift Hydraulik verfügt über eine automatische Sicherheitsfunktion. Wird der Motor gestartet, während die Stützen noch ausgefahren sind, ertönt ein Warnsignal, und die Stützen fahren automatisch ein. Dadurch wird verhindert, dass versehentlich mit ausgefahrenen Stützen losgefahren und das Fahrzeug oder die Anlage beschädigt werden.
Depending on the version, the LINNEPE QuickLift hydraulics have a total weightfrom around 46 kg.
The weight is distributedusually evenly on the front and rear axles, but may vary depending on the vehicle type andMounting position of the pump unitvary slightly.
For the remaining payload this means:
The system weight reduces the available payload accordingly, with the loadtypically evenly distributed across both axes.
Der Hubweg der hydraulischen Stützen beträgt 360 mm. Die maximal ausgleichbare Schräglage liegt bei 3,5 – 4%.
Eine vollautomatische Ausrichtung in die Waagerechte oder eine voreingestellte schräge Ausrichtung zum Beispiel zum Entleeren des Grauwassertanks ist möglich. Alternativ lässt sich die Anlage auch manuell jederzeit ansteuern.
Yes, the LINNEPE QuickLift hydraulics are basically bothTrailer hitchesas well as withload carrierscombinable.
If a trailer hitch or a load carrier fromLINEN PEEPis installed, the assembly of the lifting support system is usually possible without any problems.
For attachments from other manufacturersThe mounting option should be checked individually.
We recommend contacting the LINNEPE service teamPhotos of the existing attachmentsto provide.
Die Anlage kann ganzjährig genutzt werden. Im Winterbertieb muss vor dem Einfahren der Stützen darauf geachtet werden, dass die Fußteller nicht am Boden festgefroren sind.
We recommend reducing the pressure in the additional air suspension to the minimum before using a lifting support system. Advantage: The vehicle is then lower and the supports have a larger effective stroke. This makes it possible to compensate for larger inclines.
Sollte die Hydraulik einmal nicht eingeschaltet werden können, lassen sich die Stützen über einen Notbedienhebel am Pumpenaggregat manuell einfahren. Der Notbedienhebel liegt jeder Anlage bei.
Ein PIN-Code oder ähnliches gibt es nicht. Das abnehmbare Bedienteil wird im Innenraum verbaut, so dass kein Unbefugter außerhalb des Fahrzeugs Zugriff auf die Bedienung der Anlage hat.
Die Ausrichtung des Fahrzeugs erfolgt bei der Quick Lift Hydraulik aufbauschonend. Zuerst werden alle Stützen bis zum Bodenkontakt ausgefahren. Dann werden immer nur Stützenpaare bewegt, bis das Fahrzeug die Endposition erreicht hat.
Die komplette Hubstützenanlage einschließlich:
- vier Hubstützen
- Halterungen und Montagematerial
- Hydraulikaggregat beziehungsweise Antriebsmotoren
- Hydrauliköl und Leitungen
- Kabel
- Steuerung und Bedieneinheit
beträgt ca. 75 Kilogramm.
Die Montage der Hubstützen erfolgt am Chassis und hat keinen Einfluss auf den Böschungswinkel des Hecks oder den langen Hecküberhang.
Die Stützen sind beschichtet und dauerhaft gegen Korrosion, Steinschlag, Nässe und Schmutz geschützt. Eine Edelstahlfußplatte gehört als Standard dazu. Im Außenbereich gibt es weder Kontakte noch andere elektronische Bauteile, die durch Wasser oder Korrosion gefährdet wären.
Nach dem Ausrichten steht das Fahrzeug stabil, so dass normaler Wind, Ein- und Aussteigen, sowie Bewegungen im Fahrzeug das Schaukeln auf ein kaum spürbares Minimum reduzieren.